Meraki CW9171I: Indoor access point, SKUs and licences

In short

A compact Wi-Fi 7 access point for lower-density spaces such as small offices, shops and branches. It runs two 2x2 radios at a time (2.4 GHz plus 5 or 6 GHz) and can be managed in the Meraki dashboard. Add the CW9171I, its licence and accessories to your basket and we will quote.

Get a quote for Meraki CW9171I

Tell us roughly how many users or sites you have and we will reply by email with options and a quote.

Key specifications

Specification	Detail
Wi-Fi standard	Wi-Fi 7 (802.11be), 2.4 GHz plus 5 GHz or 6 GHz
MIMO	2x2:2 on each active radio
Max PHY rate	Up to 6.0 Gbps (2x2 320 MHz on 6 GHz plus 2.4 GHz)
Uplink	1x 100M/1G/2.5G mGig (RJ45)
USB	USB 2.0, 4.5 W
Other radios	BLE and 802.15.4 IoT radio, dedicated scan radio
DC power	54 V DC jack
Dimensions	20 x 20 x 5.3 cm (excl. bracket)
Weight	874 g
Meraki firmware	MR 32.1.5 or later

Not sure which option fits? Ask us

Tell us what you need and we will recommend the right option for your organisation, with a quote.

Order codes

SKU	Description
CW9171I	Cisco Wireless 9171I AP, Wi-Fi 7, internal omni antennas, 2x2:2, 2/5 or 2/6 GHz mode, 2.5G uplink, USB, DC jack. Global-use PID: no regulatory-domain or -MR suffix; the AP onboards to Meraki dashboard or on-premises management on install.

Licences for the CW9171I

SKU	Tier	Term	Description
LIC-CW-E	Essentials		Cisco Wireless Essentials unified subscription licence, one per AP; term set by the subscription. Required tier family for Wi-Fi 7 (CW917x) APs; Meraki also maps LIC-CW to older MR APs
LIC-CW-A	Advantage		Cisco Wireless Advantage unified subscription licence, one per AP; term set by the subscription. Required tier family for Wi-Fi 7 (CW917x) APs; Meraki also maps LIC-CW to older MR APs

See every Meraki licence code on our Meraki licence SKU list.

Is Meraki CW9171I the right fit for you?

We will check it against your systems and requirements and recommend the right option.

Accessories

SKU	Description
MA-PWR-50WAC	Meraki 50 W AC/DC power adapter (54 V, 0.92 A; power cord sold separately): the replacement adapter for Z4 and Z4C, and the AC adapter option for MR57, CW9164I, CW9166I and Wi-Fi 7 access points with a DC jack
CW-INJ-8	Cisco 802.3bt 60 W PoE injector, up to 10 Gbps Ethernet; full power for Wi-Fi 7 APs (CW9172I, CW9172H, CW9176, CW9177 series, CW9178I, CW9179F). Power cord ordered separately
AIR-PWRINJ7=	Cisco 802.3bt power injector, 5 Gbps Ethernet
AIR-PWRINJ6=	Cisco 802.3at power injector, indoor (some APs run with reduced features on 802.3at; check the AP data sheet)
MA-PWR-CORD-UK	Meraki AC power cord, UK plug, 1.8 m (6 ft). Not included in the box: order one for each Meraki switch, appliance, power adapter or PoE injector that ships without a cord
AIR-AP-BRACKET-1	Cisco low-profile access point mounting bracket (default option)
AIR-AP-BRACKET-2	Cisco universal access point mounting bracket
AIR-AP-T-RAIL-R	Cisco ceiling grid clip, recessed mounting (default option)
AIR-AP-T-RAIL-F	Cisco ceiling grid clip, flush mounting
AIR-CHNL-ADAPTER	Cisco optional adapter for channel-rail ceiling grid profiles

Datasheet and ordering

Full specifications are in the Cisco Meraki CW9171I datasheet.

Add the hardware, its licence and any accessories to your basket and send it to us for a quote.

Frequently asked questions

What licence does the Meraki CW9171I need?

The CW9171I needs a Meraki licence for its product type to run in the dashboard. The licence codes that apply are listed on this page by tier and term; we confirm the right licensing model for your organisation at quote.

How do I get a quote for the Meraki CW9171I?

Press Add next to the CW9171I and anything else you need, then open your basket and send it to us. Forever Systems, a Cisco Partner, replies by email with a quote.

Is the Meraki CW9171I still on sale?

Yes. The CW9171I is part of the current Cisco Meraki range.

Still have a question about Meraki CW9171I?

Ask us and a member of our team will reply by email.